Koehler Paper relies on Voith for the second expansion stage of paper machine 5 in Oberkirch, Germany

Koehler Paper is relying on leading Voith technologies for the second rebuild stage of PM 5.

Technologies
Typography
  • Smaller Small Medium Big Bigger
  • Default Helvetica Segoe Georgia Times
  • Koehler confirms very good and successful cooperation with Voith
  • After the second rebuild phase, a new NipcoFlex shoe press in the existing press section ensures more sustainable production
  • The technologically leading solution from Voith also increases production capacity

OBERKIRCH/HEIDENHEIM. After a successful first rebuild stage of PM 5 in Oberkirch – with the installation of the Voith SpeedSizer film press and contactless qDryPro Compact high-performance drying system – specialty paper manufacturer Koehler Paper has confirmed its confidence in Voith. Koehler has selected the full-line supplier to deliver the second modernization stage, focusing on the much-proven NipcoFlex shoe press.

''We have a long-standing, successful business relationship with Koehler. Just recently, Koehler was able to achieve a world speed record with the new PM 8 line at the Kehl location thanks to our successful cooperation and continuous optimization. We are very pleased that Koehler has again opted for our leading technologies and that our solution convinced in all points.'' - Thorsten Heidt, Senior Sales Manager at Voith

"For the second rebuild stage, we are again relying on Voith to achieve an optimum production result," says Hartmut Felsch, plant manager at Koehler’s Oberkirch site. "In Voith, we have found a strong and reliable partner with the highest quality standards for all areas of paper production."

With the installation of the NipcoFlex shoe press in the existing press section, the dry content after the press is significantly increased. As a result, large amounts of steam can be saved in the dryer section for drying the paper web. The rebuild thus helps save energy and reduce CO2 emissions in the plant. In addition, the higher dry content increases line speed and production capacity. At the same time, work safety and operability are improved when changing the felt with the aid of the cantilever framing for the pick-up felt.

The rebuild is a tailor-made solution and addresses the limited space available, especially on the drive side of the machine. As part of the rebuild, the transfer process from the press to the dryer section is optimized and a draw reduction is achieved to significantly increase efficiency. The press roll uses a TerraSpeed Trend Supreme ceramic coating, which is also utilized on other Koehler Paper machines. This guarantees optimized sheet release with long running times and a high level of cleanliness. The order is complemented by the proven QualiFlex shoe press sleeves and a start-up set for all press felts.

About the Koehler Group

The Koehler Group was founded in 1807 and has been family-run to this day. The Group’s core area of business is the development and production of high-quality, specialty paper, including thermal paper, playing card board, drink coasters, fine paper, carbonless paper, recycled paper, decor paper, wood pulp board, sublimation paper, and, since 2019, innovative specialty paper for the packaging industry, too. In Germany, the Koehler Group, with its more than 2,000 employees, has five production sites, as well as three more in the USA. The Group operates on an international level, with an export ratio of 70% in 2020 and annual revenue of €770 million.

As an energy-intensive enterprise, Koehler invests in renewable energy projects such as wind energy, hydroelectric power, photovoltaics and biomass. The Koehler Group has committed itself to producing more power from renewable sources than is needed for paper production by 2030.

More information is available here: https://www.koehler.com


Source: Voith